Licensed & Insured Exterior Contractor — Free Estimates
(973) 713-1053
All Services in Franklin, NJ
Doors in Franklin

Doors in Franklin, NJ

Local. Licensed. Done Right.

A Franklin slider grinds on its track and the lock no longer catches — and it only gets worse. We square it, flash it, and set a door that holds the weather where it belongs. Free estimate — licensed, insured, and backed in writing.

Stop Heating the Outdoors Through Your Franklin Doors

A slider whose screen door binds and skips the track is riding on rollers worn past the point of gliding smoothly. We reset the hinges into solid backing so the door carries its own weight and stops sagging toward the latch.

Once the finish on a wood door checks and peels at the base, moisture is already working into the slab underneath. We line up a new strike with the deadbolt, set it into a sound jamb, and let the lock throw fully without a jiggle.

Doors Done Right in Franklin

The right door, measured and installed to latch with one push.

Door Replacement & Installation

We pull the binding slab, square up an opening that has drifted out of plumb, and set the new door so it latches with one light push. It swings clean, seals all the way around, and keeps the weather where it belongs — outside.

Door replacement & installation →

Entry Doors We Install

Insulated fiberglass and steel entry doors stand up to the weather and hold their seal year after year. We install Therma-Tru and other quality lines, each one fit to your opening and hung to swing and latch right.

Therma-Tru entry doors →

Interior & Specialty Doors

From a warped interior slab to a patio slider off its track, we get doors moving smoothly and closing tight again. We fit the right door to the opening and install it so it works the way it should.

Masonite doors →

Plan Your Door Project

Ballpark what a new door takes before you call, then let us put real numbers to it. Our door calculator gives you a starting point, and a free in-home estimate gives you the straight answer.

Door cost calculator →

How Your Franklin Doors Get Done Right

Precise measurement, a plumb hang, and a final walkthrough.

1

Free On-Site Assessment

We start by seeing how each door sits, swings, and seals today. You leave that visit knowing exactly where every opening in the house stands.

2

Getting the Numbers Right

Every opening we’re replacing gets measured for square and plumb, not eyeballed. A door built to a proven number seals on its own; one built to a guess never quite does.

3

The Install

We start by correcting whatever the frame has done as the house settled, shimming the jamb back to plumb before the door ever goes in. A door hung in a square opening seals without a fight.

4

We Show You the Seal

We open and close each door in front of you to show it seals, swings, and locks the way it should. The old doors and packing leave with us, and you keep the written guarantee.

Hung True, Latched Tight

Pick the team that beds and seals the threshold so water stops at the sill instead of finding your floor.

The Seal Is Proven

The proof is in the operation, and you see it for yourself.

No Oversell

We quote the openings that need work, not the whole house out of habit.

Locks Every Time

A square set means the lock lines up and seals on the first try.

Low-E Glass

Low-E coating holds heat in winter and keeps the summer sun out.

No More Cold Spots

We seal the opening so the cold zone by the glass is gone.

We Answer For The Work

We hold the work to a standard and own the result.

Get a Free Door Estimate

Why the Fit Is Everything

A slab that shows a wider gap at the top than the bottom is following a jamb that tipped inward. A door that binds gets planed, then swells, then binds again, because the opening was never squared. We make the frame right, seal the threshold, and set the slab so the weatherstrip meets it evenly all the way around.

We put every door and every seal in writing before day one, so the project is clear from the start. We back the work in writing, so if the threshold we set stops shedding water, we return and fix it. Nail Force is fully licensed and insured in NJ under HIC #13VH14050100 — call (973) 713-1053 and we’ll walk your openings with you.

Door Questions — Franklin, NJ

If yours isn’t here, call us. We’ll give you a real answer.

My door swings shut by itself — is that a hinge problem?

More often the opening is out of plumb, so the door drifts to the low side. Where it lands depends on whether the slab still meets the frame all around. We check the threshold and the frame, not just the slab you point at. Reach us at (973) 713-1053 and we will read it the honest way.

My steel door has dented and rusted — can it be saved?

Surface rust can be touched up, but a dented, corroded slab is usually past a lasting repair. It depends on whether the frame is sound or has shifted and rotted. Our read on your home covers the frame’s condition, not just the door. Pick up the phone at (973) 713-1053 and we will see it in person.

Can you install a fire-rated or facility-grade door?

Yes; we set doors suited to the use and the opening so they seal and secure properly. Where this nets out depends on the opening as much as the slab. We assess the whole opening so the fix holds, not just the easy part. Call (973) 713-1053 and we will walk the opening with you.

Serving Franklin and Nearby Sussex County Towns

We provide door services throughout Sussex County, including:

View all Sussex County towns we serve →

Free Door Estimate for Franklin, NJ

One exterior door or every door in the house — call us or request online and we’ll get right back to you with a straight answer.

📞 Call (973) 713-1053 💬 Text Us