Doors in Union, NJ
Local. Licensed. Done Right.
Sticking, dragging, and refusing to latch are the three ways a Union door tells you the hang has failed. We correct the fit, detail the threshold, and hang a door that seals all around. Free estimates — we’ll tell you straight what it needs.
Stop Heating the Outdoors Through Your Union Doors
Once a door has been shimmed and re-shimmed to stop it sticking, the opening has moved enough that a clean reset is overdue. We fit a properly sized door to the opening so it seals in every season instead of fighting the humidity.
When the weatherstrip has flattened and no longer meets the slab, the gap it leaves lets air and water find the same path all year. We take the whole unit out, make the rough opening right, and set a door that isn’t leaning on the lock to stay sealed.
Door Services for Union Homes
From a single binding entry door to every opening in the house.
Door Replacement & Installation
We pull the binding slab, square up an opening that has drifted out of plumb, and set the new door so it latches with one light push. It swings clean, seals all the way around, and keeps the weather where it belongs — outside.
Door replacement & installation →Entry Doors We Install
Insulated fiberglass and steel entry doors stand up to the weather and hold their seal year after year. We install Therma-Tru and other quality lines, each one fit to your opening and hung to swing and latch right.
Therma-Tru entry doors →Interior & Specialty Doors
From a warped interior slab to a patio slider off its track, we get doors moving smoothly and closing tight again. We fit the right door to the opening and install it so it works the way it should.
Masonite doors →Plan Your Door Project
Ballpark what a new door takes before you call, then let us put real numbers to it. Our door calculator gives you a starting point, and a free in-home estimate gives you the straight answer.
Door cost calculator →How We Handle Your Union Doors
Precise measurement, a plumb hang, and a final walkthrough.
A Look at Your Doors
You’ll get a straight opinion on every door in the walkthrough, not a push toward the biggest job. If an opening is sound, we won’t pretend it needs replacing.
Measured to the Opening
Before we order, we confirm how square each opening actually is by measuring corner to corner both ways. If those diagonals don’t match, the frame has racked, and we plan to correct it.
The Doors Go In
The door goes into an opening we’ve already made right, so it isn’t wrestling a crooked frame. We check plumb, level, reveal, and seal before we ever call it set.
The Final Check
You get to test every latch and every seal yourself before we pack up a single thing. Once each door has passed with you watching, we clean up and leave the warranty behind.
The Install Is the Difference
Work with the people who air-seal the opening in the wall, not just around the slab, so no draft slips past.
We level each unit so it operates clean and seals tight.
Clean, even sightlines finish the facade.
A sealed, efficient unit holds comfort through summer and winter both.
The opening gets squared so the unit sits plumb and tight.
Set true and sealed, it’s done and stays done.
Sealed, gas-filled glass slows the heat loss the old single-pane let go.
Why Our Doors Seal and Stay Sealed
The corner where light shows through at the top is a racked opening, not a slab that shrank. A fresh coat of paint on a binding door seals the wood but not the fit that is fighting it. We square the header and the sides, hang the slab, and align the strike so the latch catches on the first close.
Every step is written down ahead of time, from squaring the opening to setting the sweep, in plain terms. The work comes with a written warranty you can point to, not just our word. Nail Force is fully licensed and insured in NJ under HIC #13VH14050100 — call (973) 713-1053 and we’ll walk your openings with you.
Door Questions — Union, NJ
If yours isn’t here, call us. We’ll give you a real answer.
Yes; we reset or replace it so it rides the track and locks properly. Most of the time the part you notice is downstream of the real cause. We check the seal, the swing, and the square so the advice is honest. Give us a call at (973) 713-1053 and we will talk through what fits your situation.
More often the opening is out of plumb, so the door drifts to the low side. It turns on whether the frame can be saved or has to be rebuilt. We look at the whole opening so the fix holds, not just the easy part. Ring (973) 713-1053 and we will tell you what we find, plainly.
Usually the opening has drifted out of square, so the slab drags against the frame. What it needs depends on how far the opening has drifted out of true. Our crew reads the opening and the threshold before advising a fix. Reach us at (973) 713-1053 and we will quote it honestly.
Serving Union and Nearby Union County Towns
We provide door services throughout Union County, including:
All Services in Union
View all services we offer in Union, NJ →More Services in Union
Roofing in Union Siding in Union Windows in Union Doors in Union Painting in UnionNearby Towns
Cranford Plainfield Roselle New Providence Berkeley HeightsFree Door Estimate for Union, NJ
One exterior door or every door in the house — call us or request online and we’ll get right back to you with a straight answer.